ZFS-C光纖光柵混凝土表面應變傳感器
混凝土表面應變計應用于監測砼箱梁、大型混凝土結構、水工大壩等混凝土表面的應力變化情況，安裝方式牢固。
此產品是我公司基于光纖光柵傳感技術，針對于混凝土表面的應變監測專門研發的產品。此傳感器具有良好的防水功能，在比較大的濕度變化情況下，傳感器工作性能穩定，技術指標。
JH-FGS-A1光纖光柵應變傳感器
JH-FGS-A1光纖光柵埋入式標準型應變計主要用于混凝土、鋼筋混凝土或可塑性材料如基礎、樁基、橋梁、隧道、襯砌等內部應變測量，以便于長期觀測器結構應力應變的變化并進行狀態分析。
JH-FGS-A1采用特有的彈性梁結構，具有較高的測量分辨率和測量精度，其內部敏感元件，無電源、本質安全、不受電磁干擾及雷擊損傷，且可通過光纖進行長距離傳輸（30km）。現場安裝時先將傳感器固定在鋼筋籠或其他支護結構上，然后在進行澆筑。產品符合國家建筑工業行業標準JG/T 422-2013。
產品特點
••安裝方便，適合進行長期監測，尤其適用于混凝土箱梁、其他混凝土澆筑結構；
•單光柵，適用于環境溫度變化小的工程，占用波長帶寬資源少，批量實用性高，節省項目整體成本；
•尾纖采用PU披覆鎧裝光纜，具有優異的耐溫性能和耐腐蝕、耐老化性能，適應長期野外存活環境。
技術參數
| 項目 | 參數值 |
| 量程（με） | ±1500 |
| 精度（με） | 1%F.S. |
| 分辨率（με） | 0.1% F.S. |
| 光柵數量 | 1 |
| 光柵中心波長(nm) | 1528~1563 |
| 反射率 | ≥85% |
| 工作溫度范圍（℃） | -30~85 |
| 尺寸(mm) | Φ22x130 |
| 尾纖 | 耐腐蝕PU披覆鎧裝光纜，兩端各1.5m，可定制 |
| 連接方式 | 熔接或FC/APC接頭 |
| 安裝方式 | 焊接/粘接/螺栓固定 |
RM4220 應變傳感器放大器
OSP-A光纖應變傳感器OSP-A
SLB700A應變傳感器
| SLB700A應變傳感器|德國HBM應變傳感器的詳細資料 |
| The SLB700A strain transducer from HBM attaches directly to a plane surface with a friction joint ａnd four bolts. This arrangement enables the strain of the test object to be transferred directly to the SLB700A making it ideal for installations where lack of space, or installation conditions, makes it difficult to use standard force transducers. Ideal applications for the stainless steel SLB700A include multi-stand ａnd C-stand presses. The strain transducer is mainly intended for applications where high forces are to be measured such as roll stands ａnd injection molding machines. Where bending effects need to be compensated, at least two SLB700A strain transducers should be mounted on opposite sides of the test piece ａnd connected electrically in parallel. Screw on strain transducer strain gauge measurement system nominal strain 500 µm/m nominal sensitivity 1.5 mV/V fixed connection cable 6m long with free ends Screw on strain transducer strain gauge measurement system nominal strain 500 µm/m nominal sensitivity 1.5 mV/V fixed connection cable 12 m long with free ends Strain transducer with strain gage measuring system, Nominal (rated) strain 500 µm/m Output: 0 to 10V, Screw-on type, Fixed cable, 6 m long Strain transducer with strain gage measuring system, Nominal (rated) strain 500 µm/m Output: 4 to 20mA, Screw-on type, Fixed cable, 6 m long 1-SLB700A/06-1 1-SLB700A/12-1 1-SLB700A/06VA1-1 1-SLB700A/12VA1-1 |
HBM SLB700A - 高應力應變傳感器
The SLB700A strain transducer from HBM attaches directly to a plane surface with a friction joint ａnd four bolts. This arrangement enables the strain of the test object to be transferred directly to the SLB700A making it ideal for installations where lack of space, or installation conditions, makes it difficult to use standard force transducers.
Ideal applications for the stainless steel SLB700A include multi-stand ａnd C-stand presses. The strain transducer is mainly intended for applications where high forces are to be measured such as roll stands ａnd injection molding machines.
Where bending effects need to be compensated, at least two SLB700A strain transducers should be mounted on opposite sides of the test piece ａnd connected electrically in parallel.
Reliable measurement resultsThe SLB700A is designed with compensating elements for adapting to the different steel types commonly used in mechanical engineering. The feature means that the temperature effect that could lead to major zero offsets can be neglected. Without the compensating elements, the different thermal expansion coefficients of transducer ａnd test object would change the transducer’s zero signal.
The SLB700A features a high degree of protection ａnd comes supplied with an oil-resistant cable.
Easy integration into automation systemsThe PME ａnd digiCLIP amplifier systems complete the SLB700A ａnd provide a self-sustained monitoring unit for all industry requirements. The complete system features a CAN or Profibus interface for easy integration into automation systems.
- For monitoring strain in statically ａnd dynamically loaded units such as cranes, presses ａnd roll stands
- Simply bolted into place
- Stainless steel
- Protected from harmful environmental effects
- Inexpensive
- Strain gauge full bridge
| Measuring system | strain gage full bridge |
| Sensitivity [mV/V] | 1.5 |
| Linearity deviation [%] | 5 |
| Mounting | simple bolt-on design |
| Nominal range | 500 um/m |
| Nominal temperature [°C ] | -10...+40 |
| Weight [g] |
最新產品
- 紅外線防撞儀 2025/5/8 14:34:08
- QY-S充油式不銹鋼潛水泵 ，全不銹鋼油浸式潛水電泵 2025/5/8 14:33:25
- 消泡劑消泡性能測定儀 2025/5/8 14:33:11
- 果蔬呼吸強度分析儀 2025/5/8 14:31:58
- 384孔透明底白板 TC增強處理對標781986 2025/5/8 14:31:09
- 紅外線防撞限位裝置器 2025/5/8 14:29:33
- 384孔透明板 黑板 白板 TC處理培養板 2025/5/8 14:29:02
- TL-2000激光開封機 2025/5/8 14:28:35
- 葉綠素含量測定儀 葉綠素含量測定儀廠家 2025/5/8 14:28:08
- 便攜式葉綠素測定儀 便攜式葉綠素測定儀廠家 2025/5/8 14:27:57
- 葉綠素儀 葉綠素儀廠家 2025/5/8 14:27:45
- 智能葉綠素儀 智能葉綠素儀廠家 2025/5/8 14:27:28
- 活體葉綠素測定儀 活體葉綠素測定儀廠家 2025/5/8 14:27:13
- 葉片營養診斷儀 葉片營養診斷儀廠家 2025/5/8 14:27:03
- 手持式植物養分速測儀 手持式植物養分速測儀廠家 2025/5/8 14:26:53
- 植物營養測定儀 植物營養測定儀廠家 2025/5/8 14:26:42
- 植物養分測定儀 植物養分測定儀廠家 2025/5/8 14:26:18
- 紅外線防撞限位裝置器 2025/5/8 14:25:31
- 粉體密度測試儀 粉體密度測試儀廠家 2025/5/8 14:24:23
- 振實密度計 振實密度計廠家 2025/5/8 14:24:06
- 聚偏氟乙烯PVDF高壓極化裝置 2025/5/8 14:23:52
- 高精度熔體流動速率測定儀源頭廠家 2025/5/8 14:23:17
- 96孔白板 黑板 TC增強處理細胞培養板 2025/5/8 14:22:03
- 激光防撞儀 2025/5/8 14:21:47
- 激光防撞儀 2025/5/8 14:17:13
- 上海合新淋雨試驗裝置 2025/5/8 14:16:54
- 本安型防爆電子臺秤 尺寸定制 適用于化工，電氣廠 2025/5/8 14:15:31
- 德國LOGOTEK激光傳感器 2025/5/8 14:13:46
- 紅外線防撞儀 2025/5/8 14:13:43
- 紅外線防撞限位裝置器 2025/5/8 14:10:04